The Evolution Of Photo ID Goes From Analog Film To Digital Simplicity
Kaysville, Utah (ContentDesk) July 24, 2006 -- A trip to the local department store will reveal that very few cameras use traditional film. The majority of personal hand-held cameras sold today are digital. They are easy to use, inexpensive (compared to film and processing costs), and allow the user to pick and choose which photographs they want to print or delete. Print quality is now equal to, or in many cases surpassed, traditional photo paper prints.Thirty years ago, digital photography managed to only create a 0.01 megapixel picture, which is barely a dot. In 2006, regular household digital cameras vary between six and eight megapixels.
The cameras commercial photographers use have even higher megapixel ratings. Some people still prefer traditional film, but they are in the minority.Traditional manufacturers of film and cameras were reluctant making the transition. According to MSNBC, Kodak had a hard time letting go of their trademark celluloid film. Kodak didnt even produce a digital camera until 2001. The digital revolution was in full swing.Along with the camera, photo ID has had its own the evolution.
Creating an ID card used to be as easy as snapping a photograph, cutting it to size, typing some text on a card and laminating it together. Polaroid cameras made the process even easier. Some people still prefer the traditional Polaroid-style ID cards due to their simplicity (http://www.idhouse.com/cam1.htm) and inexpensive initial cost.Modern photo ID systems use new digital technology. IDs are now printed on PVC plastic cards, the same material used for credit cards. Photos are taken with digital or video cameras, uploaded to ID card software, then thermally printed using a digital card printer (http://www.idhouse.com/print1.htm).
Photos are easy to edit, and templates are used to design and create cards on the fly. Bar codes, electronic chips, magnetic stripes and more can be added to increase the effectiveness and security of an ID card.As technology changes, photo IDs will continue to evolve. One thing is certain, digital technology is here to stay.For further information, please contact Morgan Cloward, Marketing Director of ID House, 1-800-247-9143, e-mail protected from spam bots.#.
The EPA Practices What it Preaches by Reducing Paper Waste with FinePrint 5
(ContentDesk via MobilityNewswire) May 6, 2004 -- Paper waste is epidemic in most organizations but when you are the government agency charged with protecting the environment, such waste is completely contrary to your mission.
The mission of the US Environmental Protection Agency (EPA) is to protect human health and to safeguard the natural environment ? air, water, and land ? upon which life depends. For 30 years, EPA has been working for a cleaner, healthier environment for the American people. All regions of the EPA's nationwide infrastructure have been challenged to find ways to reduce paper waste through its Resource Conservation Challenge (RCC). EPA's Region 9 decided to seek out a technical solution to the problem and take action to stem the waste of paper that was occurring at printer stations throughout their offices.
In their search for a solution, EPA Region 9 discovered FinePrint, a printing management...
The EPA Practices What it Preaches by Reducing Paper Waste with FinePrint 5
Laser printer > The EPA Practices What it Preaches by Reducing Paper Waste with FinePrint 5
A Technological Breakthrough Scratch Protection Formula For All Disc Formats
DENVER, CO (ContentDesk) February 28, 2004 -? ProLine, a longtime producer of Accessories & Media Packaging for the Home Entertainment and Computer Environment has announced a new development for an invisible disc coating that makes the data side of all disc formats more scratch resistant.
The formulation, named Disc Guard 2, is a liquid compound of special emulsifiable resins that simply buffs on and off the disc. The oxygen-activated molecules left on the disc surface produces a clear layer that allows the laser-read data to be enhanced for correct reproduction while forming a shield of protection over a short period of time without restricting immediate disc use.
A hard protective glass-like coating guards against accidental scratching and fingerprints during disc handling.
Application of the formula requires two small drops costing just pennies per disc while repeated use increases the durability of the disc.
Should a disc be subjected to unusual...
A Technological Breakthrough Scratch Protection Formula For All Disc Formats
Laser printer > A Technological Breakthrough Scratch Protection Formula For All Disc Formats
Laser Hair Removal - history
The advent of laser machines in the 1960's excited both scientists and the public.
The first laser machines used for dermatology emerged in the mid-sixties. A scientist --- Max Goldman --- first described ruby-laser injury to pigmented hair follicles in 1963, which led to further research in how this new technology could be used.
This first type of laser machine sent out a continuous wave which proved impractical for removing hair from skin, since the laser beam could not be controlled enough to avoid damage to the surrounding skin.
The development of the Q switch, which could be compared to the shutter on a camera, allowed the laser light to be emitted in controlled pulses. This development reduced damage to skin further.
The next phase of more advanced laser machine was introduced in approximately 1969.
These machines worked by targeting the individual hair follicle and delivering the energy through a fiber optic probe...
Laser printer > Laser Hair Removal - history
Make CD Covers
The CD cover is the front-face of a CD case. It identifies the disc content and also adds a personal touch to every CD. Attractive CD covers are marketable, as people tend to identify the inside content with the cover design. Personal collectors can make CD covers at home, or they can use professional CD cover design services.
You can simply log on to the Internet and search for CD covers on a search engine if you are looking to make a CD cover.
You will see a long listing of good CD cover archives that have a large database of audio, DVD, and data CD covers. Some websites stock previously published covers, while others have stock cover designs that are ready-to-print. There are several reliable websites that also offer these CD covers for free.
A CD cover is a four-fold sheet that must clearly list the CD title, and also have credits and other information printed on it. Many people prefer to opt for an all-color design instead of having a black-and-white...
Laser printer > Make CD Covers
Metrofuser Develops Fix for HP 4200 Fuser Film Factory Defect
Roselle New Jersey (ContentDesk) September 29, 2005 -- After months of research and development, Metrofuser has developed an engineering upgrade that has corrected the film delaminating on the HP 4200 Fusing Assembly. The proprietary upgrade has been implemented in the production of the fuser and has resulted in a 98% reduction in film failures. Service companies and resellers now have access to a low cost, quality fuser that will not let them down or their customers down. The Delaminated FuserUsers of certain HP LaserJet 4200 series printers have experienced printing problems caused by delaminated or torn film on the product's fuser and occurring long before the end of the fuser's 200,000-page life. The delaminating causes a catastrophic image defect and has shortened the life of the fuser considerably.
Customer call backs for service companies have sky rocked due to the premature failures. Collectively this problem is estimated to cost service companies hundreds of thousands...
Metrofuser Develops Fix for HP 4200 Fuser Film Factory Defect
Laser printer > Metrofuser Develops Fix for HP 4200 Fuser Film Factory Defect
SOUTHERN MANUFACTURING SHOW CAN BE THE PERFECT FINISH FOR VISITORS TO STAND D38
???Using Otec equipment the cost effective, high quality deburring and polishing of components are possible in diverse industries such as aerospace, automotive, tooling and engineering and even plastics.
A typical example is an aluminium part made on a CNC machine that was hand deburred before being gold plated.
The part maker made a 57 per cent saving by switching to processing on Otec deburring machines.???On stand will be Otec CF disc and DF drag finishing equipment.
These compact units can be located in the CNC manufacturing cell for just in time production.
Being up to 10 times faster than vibro machines and 20 times faster than conventional barrel finishing, means the CF and DF keep pace with CNC production and so eliminates the need for batching.
As parts leave the CNC machine they can be deburred immediately.
The Otec equipment is quiet too, eliminating one of the health and safety aspects of using large vibro machines.???For...
Laser printer > SOUTHERN MANUFACTURING SHOW CAN BE THE PERFECT FINISH FOR VISITORS TO STAND D38